Cleaning a flue from the bottom up · review
An Italian cleaning kit for pellet stove pipes: a 3 m (10 ft) coated rod, two spring-jointed FLEX nylon brushes for 80 and 100 mm pipes, a handle and a hand brush. It passes a 90° bend or two 45° bends.
A cleaning kit for pellet stove pipes. The Amazon.com listing gives one 3 m (10 ft) extension rod, two FLEX brushes of 80 and 100 mm, a hand brush and a handle. It suits stainless and enameled pellet pipes of 8 and 10 cm, passes a 90° bend or two 45° bends, and its brushes have a special spring that makes them flexible without deforming. The bristles are nylon and the rods are coated to glide more easily. It was selling for $72.62 from a third-party seller on November 7, 2026.
A brush head that bends on the rod is the difference between cleaning a pipe and reaching the first corner. A rigid brush is square to the rod it is screwed to: arriving at a right angle, the head stays square while the rod tries to turn, and it jams. Pushed harder, it jams harder. A jointed head folds through the corner and opens out again beyond it. Anyone whose stove pipe leaves the appliance and turns into a wall has that corner.
Pellet pipes are thin-walled stainless or enameled steel. Nylon loosens soot and ash without scoring the surface, and a scored surface holds soot better than a smooth one. For hard, glazed creosote in a masonry chimney, nylon is not enough; that is a job for a steel brush or a sweep.
A pellet stove’s pipe run is short, and the awkward part is the bend rather than the length. For a full chimney, a longer rod kit such as the Bluesea 30 ft set or the drill-driven SootEater reaches much further.
About $73 from a third-party seller on November 7, 2026. Check the buy box before ordering.
The annual professional sweep that insurers and fire codes expect. This kit is for what happens between those visits.
Prices quoted in this text are dated readings and can differ from the live price at the top of the page.
| Contents | 1 extension rod of 3 m (10 ft), 2 FLEX brushes (80 and 100 mm), 1 hand brush and 1 handle, per the Amazon.com listing |
|---|---|
| Pipe sizes | Pellet stove pipes of 8 and 10 cm (3.15 and 3.94 in), stainless or enameled |
| Bends | One 90° bend or a double 45° bend |
| Brush joint | A special spring makes the FLEX brushes flexible without deforming |
| Bristles | Nylon, designed to clean without scratching the inside of the pipe |
| Rod | Coated, for durability and easier gliding |
| Thread | M12, per Baretto's European listings, compatible with the rest of its range |
| Weight | 680 g (1.5 lb), in Amazon's product details |
| Amazon reference | B01IIXRPX0 |
| EAN | 8053329692243 |
It lets the brush head bend relative to the rod. A rigid brush arriving at a 90° bend jams, because the head stays square to the rod. A spring-jointed FLEX brush folds through the corner and straightens again on the other side.
It is made for pellet stove pipes of 80 and 100 mm, about 3.15 and 3.94 in, in stainless or enameled steel. Measure the inside diameter of your pipe first; a 4 in wood stove pipe is larger than either brush.
For the pipe run of a pellet stove, usually: it rises a short distance and goes into a chimney or out through a wall. For a full chimney, a longer rod kit — around 30 ft — is the tool.
No. It is for cleaning between professional sweeps, which most insurers and fire codes expect at least once a year for a solid-fuel or pellet appliance.
7.8/ 10
The kit for a pellet pipe with a bend in it: jointed brushes follow a 90° corner where a rigid head jams. It is short and nylon only, and it is made for 80 and 100 mm pellet pipes, not for a chimney.
This model is listed on Amazon.com, at ≈ $73 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 14, 2026.
A pellet stove whose 80 or 100 mm pipe turns a 90° corner into a wall or chimney, between professional sweeps.
Specifications: the manufacturer sheet for wood heating equipment and the matching Amazon product page. Prices, ratings and availability: read on Amazon.com from a New York address. Every figure on this page names its source.
Same shelf, closest price — what the same spend else heats.
18 ft · 6 flexible 3 ft rods · cordless drill powered · bottom-up cleaning
The best-known rotary sweep kit: spinning whips on 18 feet of rods, driven by your drill, with 3,045 ratings at 4.6 out of 5.
Best for: Anyone who wants to stay off the roof.
≈ $91
9 rods, 39.3 in each · nylon brush · push-button lock · gloves and plastic sheet
A 30 ft nylon rod kit with chrome button locks, gloves and a dust sheet, with 892 ratings at 4.5 out of 5.
Best for: A two-story chimney on a budget.
≈ $60
8 in square · tempered steel · 6 fiberglass rods, 3 ft · made in USA
A made-in-USA bundle for 8 inch square masonry flues, with a tempered steel brush and six fiberglass rods.
Best for: A masonry chimney with a square tile.
≈ $98
