Turning an open fireplace into a heater · review
The insert version of the HP22 pellet stove, with a finishing shroud, an ash vacuum and a remote included.
Up to 41,000 BTU per hour, 2,800 square feet in mild conditions, a 47 pound hopper and up to 18 hours of burn time. Five power settings, a thermostat and auto ignition are included.
The hopper falls from 55 to 47 pounds and the stated burn from 20 to 18 hours. In exchange you keep your floor space and use the fireplace you have.
It needs power at the fireplace and a pellet vent. A pellet stove stops without electricity, so read the manual on outages.
Prices quoted in this text are dated readings and can differ from the live price at the top of the page.
| Stated output | Up to 41,000 BTU per hour |
|---|---|
| Stated heating area | Up to 2,800 sq ft, in mild conditions |
| Hopper | 47 lb |
| Stated burn time | Up to 18 hours |
| Included | Finishing shroud, ash vacuum, remote |
| Certification | EPA and CSA, stated |
| Weight | 273 lb |
| Amazon reference | B083L9P238 |
The listing calls it a zero-clearance fireplace insert design. Confirm the clearances and your fireplace type in the manual.
The finishing shroud, an ash vacuum and a remote control, according to the listing.
7.8/ 10
Pellet convenience in a fireplace, at a high price. Add the venting cost before you decide.
This model is listed on Amazon.com, at ≈ $2499 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 14, 2026.
A household that wants thermostat heat from an existing fireplace.
Specifications: the manufacturer sheet for wood heating equipment and the matching Amazon product page. Prices, ratings and availability: read on Amazon.com from a New York address. Every figure on this page names its source.
Same shelf, closest price — what the same spend else heats.
Wood insert · non-catalytic · up to 28,901 BTU · trim kits · US maker
A small US-made insert to turn an open fireplace into a heater.
Best for: Small to medium rooms with an existing masonry fireplace
≈ $2,723
69,000 BTU · up to 1,200 sq ft · 1.2 cu ft firebox · 18 in logs · 150 CFM blower · 31 x 44 in surround
A wood insert for a masonry fireplace with a 150 CFM blower and a large surround, with 193 ratings at 4.3 out of 5.
Best for: A homeowner turning an open masonry fireplace into a real heat source.
≈ $1377
up to 1,200 sq ft · 18 in logs · 3/16 in plate steel · firebrick lined · 100 CFM blower included
A wood insert with a 100 CFM blower and 3/16 inch plate steel, with no Amazon ratings so far.
Best for: A buyer who cannot find the Ashley AW1820E or prefers this look.
≈ $1299
