Flue dampers
A short pipe section with a built-in damper and published end sizes, with 5 ratings.
A short pipe section with a built-in damper and published end sizes, with 5 ratings.
Best for: A connector with no drilling.
DYVBXS gives stainless steel, a high-temperature coating and a handle.
A damper in the connector needs a stove whose manual allows it. Never close one fully on a live fire: CO can back up into the room. Keep a CO alarm in the room.
It is a short section with ends of 5.95 and 6.06 inches.
4.84 inches.
This model is listed on Amazon.com, at ≈ $50 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 1, 2026.
A connector with no drilling.
Same shelf, nearest prices. We list only specifications every stove states — gaps compare nothing.
| Model | Price | Material |
|---|---|---|
| DYVBXS Stove Pipe Damper Section, 6 in | $50 | Stainless with powder coat |
| Flueblocker Wool Flue Plug, 5 to 6 in Round | $35 | 100% Herdwick wool |
| XiHu BM0053-A Cast Iron Damper, 8 in | $23 | Cast iron |
| showingo BM0051-A Cast Iron Damper, 6 in | $16 | Cast iron, steel handle |
At $50, it sits +117 % against the $23 median of the 5 models in this category published here.
Specifications: the manufacturer sheet for wood heating equipment and the matching Amazon product page. Prices, ratings and availability: read on Amazon.com from a New York address. Every figure on this page names its source.
A plain 7 inch cast iron damper from a stove pipe maker, with 63 ratings at 4.7 out of 5.
Best for: A 7 inch stove pipe.
A cast iron damper for 6 inch single-wall pipe, that warns you never to close it fully.
Best for: A 6 inch single-wall connector.
An 8 inch cast iron damper, and only 2 ratings.
Best for: An 8 inch connector.
A pair of thin 3.5 inch elbows for tent stoves.
Best for: A 3.5 inch tent stove pipe.
A 24-gauge elbow from a known chimney brand, with die-formed ends that need no crimping.
Best for: A DuraBlack connector run.
A double-wall elbow for a DVL connector run, with wall thicknesses and clearances stated.
Best for: A DVL connector that has to turn.
The price beside each product is fetched as this page opens, and it is the only figure here that is current. Any amount written into the prose was read once, on the day that sentence was written, and nothing has refreshed it since.